Technical Parameters

Diameter 40mm Tube

Model Stroke Dimension  Model Stroke Dimension
DL-40-100 100mm 425mm DL-40-500 500mm 825mm
DL-40-200 200mm 525mm DL-40-600 600mm 925mm
DL-40-300 300mm 625mm DL-40-700 700mm 1025mm
DL-40-400 400mm 725mm DL-40-1000 1000mm 1325mm
     Force:500-900N
     Voltage:AC 220-110(V)
     Stroke Speed:6-7mm/s
     Unload Current:0.2-0.3A
     Protection Index:IP 45-65
     Stroke Length:50-1000mm
     Overload Current: Electronic Protection
Sample Parameters(Stainless steel tube)

Model

Stroke

Dimension

Force

Protection
Index

Voitage

Unload
Current

Stroke
Speed

Stroke
Length

Overload
Current

HT-40-500

500mm

825mm

500N

IP 45

DC 12V

0.7A

10mm/s

500mm

Electronic Protection

Note: Stroke can be customized(Tube can choose stainless steel or aluminum alloy)

             

  HT-Φ40 Linear Actuator(Motor+ Accessories)

Product Introduction
● Linear Actuator is a electric driver that transform
the motor motion from rotary to linear reciprocating.
● Can used as actuating mechanism in all kinds of simple orcomplex technological process, realize remote control, centralized control or automatic control.
● Through gears deceleration and driving a pair of feed screw nut, the rotary motion change to linear. Motor's forward and reverse complete the push action.
Variety of levers, rocker or connecting rod complete some complex action like rotation and shaking. By changing the length of thelever arm can increase or decrease the stroke.
● Three fixed points of mounting structure ensure that poweris most effective allocation. Simple and convenient installation.
● Aluminum alloy tube, clean, less susceptible to corrosion.

Technical  Introduction』    
● Small size, nice appearance, varieties of mounting brackets available.
● Driven by motor directly, no need of oil orgas source.
●For Glass wall windows, large exhaust channel mouth, skylights.
●Reliable performance, quick action, smooth running, same pushing or pulling strength, good environmental adaptability.
●Advanced technology, low noise, waterproof and dustproof.
● Microcontroller (MCU) overload protection.

Standard Accessories


 

Motor back connector:connected one side of the motor, fixed it on the place you want to install.


 

Motor front connector:  connected another side of the motor, fixed iton the place you want to install.


 

Retractable connector: ringfixed on the motor body, U-shaped slot fixed on the ring, fixed the motor onthe place you want to install.


 

Retractable connectorparts(screw+ support+ring).

Installation
 

Motor output shaft               
● Head made of stainless steel.
● Smooth surface, fine workmanship, high degree
of tightness between components.
Motor travel head
● Head made of stainless steel.
● Smoothsurface, fine workmanship, high degree of tightness between components.
Powerwire
● Connected the power, power on the motor.
● Control pull back and push forth to open and close the window.
● Rated voltage: Optional 12Vdc, 24Vdc, 230Vac
Motor tube
● Zinc alloy tube, less susceptible to corrosion,good
looking and durable(It also can be Aluminum or stainless
steel,according to Customers' requirements ).
● Simple design, elegant appearance.

 

Middle of the motor
● Aluminum alloy tube, smooth surface,fine workmanship.

This stainless steel sample motor using 12VDC. ( If connected to 220VAC will damage the motor)
This product can not be installed in the outdoor where have rain.
This product without anti-pinch hand function, pay attention when install or use.
Customer who buy our products please contact us to register in order to enjoy the warranty and repair services. 
Photo displayed may have color deviation, actual item is the standard.